L7-090 Repair and Liner - Chemical Storage Tanks

Subject: L7-090 Repair and Liner - Chemical Storage Tanks
Solicitation Number: FA857126Q0087
Notice Type: SOLICIT
NAICS: 238990
Set-Aside: No Set aside used
Notice Published: 07-01-26
Response Due: 07-01-26

Agency: Department of the Air Force
Office: FA8571 MAINT CONTRACTING AFSC PZIM
Contact: Nikia Streeter This email address is being protected from spambots. You need JavaScript enabled to view it.
Office Address: ROBINS AFB, GA 31098-1672
Place of Performance: GA 31098

Related Notices:

Click for official SAM (FBO) notice, additional information, and accompanying attachments

This solicitation is being conducted under Simplified Acquisition Procedures (SAP) as a Request for Quote (RFQ) No. FA857126QOO87. This requirement is being solicited as a single source requirement to the Original Equipment Manufacturer (OEM) for the repair of L7-090 Liner and purchase of one (1) additional L7-090 Liner. The Contractor shall provide all the tools, parts, materials, equipment, labor, repairs, and travel necessary to perform repairs on the existing Polyvinylidene Flouride (PVDF) L7-090 Liner for the Chemical Storage Tank in Building 20128 and supply one (1) new L7-090 Liner for the Commodities Maintenance Group (CMXG) at Robins Air Force Base (AFB), Georgia. The Contractor shall repair the existing liner in the facility inside of L7-090. The additional spare liner shall be identical in contruction, material, and instrumentation to the existing liner and be stored by CMXG for future use. The Contractor shall provide the following: ? Repair of L7-090 Liner on Tank 120 at Building 20128. This will include one (1) technician to facilitate repairs. ? 1 each (PVDF) Kynar? Rigid Box Liner to fit CMXG?s existing tank ? Approximately 48? x 48? x 72? deep, fabricated from ?? thick Kynar 2850 Flex sidewalls and rim and 3/8? thick Kynar 2850 Flex bottom. Liner will be fabricated incorporating Patented (#8,133,345) N-FUZE lining technology, utilizing pressure butt-welded vertical joints and extrusion welded sidewall to bottom contruction. The tank shall have one (1) 45 degree corner where CMXG can re-install existing TANKeye Plus Leak Dectection System