Stratvocate offers a wealth of information and easy-to-use tools for those involved in federal contracting.

Subject: Electronic Scissor Lift
Solicitation Number: W911S226U3811
Notice Type: SOLICIT
NAICS: 333924
Set-Aside: Total Small Business
Notice Published: 07-24-26
Response Due: 07-31-26

Agency: Department of the Army
Office: W6QM MICC-FT DRUM
Contact: Sarah Long This email address is being protected from spambots. You need JavaScript enabled to view it.
Office Address: FORT DRUM, NY 13602-5220
Place of Performance: Fort Sill, OK 73503


Click for official SAM (FBO) notice, additional information, and accompanying attachments

Item: Electronic Scissor Lift Brand Name: JLG or Equal Part Number: ES1932 Salient Characteristics:1. General Requirements: Power Source: The unit must be a 24V DC electric-powered scissor lift featuring a highly efficient electric drive system. Application: The unit must be rated for both indoor and outdoor operational use. 2.Dimensional and Weight Requirements: Maximum Overall Width: 32 inches (81 cm) to ensure the unit can maneuver through standard commercial doorways and tight spaces. Maximum Stowed Height (Rails Lowered): 78.2 inches (1.99 m). Maximum Machine Weight: 3,450 lbs (1,565 kg). 3. Performance and Capacity Minimums: Platform Height: Must achieve a minimum platform height of 19 feet (5.8 m). Platform Capacity: Must have a minimum weight capacity of 507 lbs (230 kg). Platform Extension: The platform must include an extension deck that provides at least 36 inches (91 cm) of additional outreach. Occupancy Rating: Must be rated for a minimum of two (2) personnel indoors and one (1) person outdoors. ? Drive Capabilities: The unit must be capable of being driven while fully elevated. Gradeability: Must have a minimum gradeability rating of 25 percent. 4.Safety and Operational Features: Rail System: Must include quickly folding/collapsible rails (equivalent to QuikFold) for rapid stowing and transport. Safety Mechanisms: Must be equipped with an active pothole protection system. Must include a load sensing system to monitor platform weight and ensure safe operation parameters. Operator Convenience: The operator platform must include standard convenience features such as a built-in USB charger and device/phone holder.