Sources Sought Parts Washer Cleaner
Subject: Sources Sought Parts Washer CleanerSolicitation Number: FA3016PartsWasherCleanerRecompeteNotice Type: SRCSGTNAICS: 562112Notice Published: 08-07-26Response Due: 08-17-26Agency: Department of the Air ForceOffice: FA3016 502 CONS CLContact: Ernest Sutton This email address is being protected from spambots. You need JavaScript enabled to view it.Office Address: JBSA LACKLAND, TX 78236-5286Place of Performance: San Antonio, TX
Click for official SAM (FBO) notice, additional information, and accompanying attachments
The contractor shall provide all necessary equipment, tools, materials, transportation and labor to provide and maintain recirculating parts washers using solvent recycling and waste minimization practices. Scope of Work. Recirculating parts washers shall include lighting and filtration to maintain solvent effectiveness between service intervals. It shall also have a permanent and conspicuous label posted on or near the parts washer or immersion cleaner summarizing proper operating procedures to minimize emissions. All immersion cleaners shall have a minimum freeboard ratio of 0.70, when the width is measured at the solvent surface level. All waste and solvents from the recirculating parts washers and immersion cleaners shall be manifested under the Uniform Hazardous Waste Manifest System, if not re-used. Coordination with the 802d Civil Engineering Squadron (802 CES)/CEIEC is required.