Toolcat
Subject: ToolcatSolicitation Number: W911S226U3981Notice Type: SOLICITNAICS: 333618Set-Aside: Total Small BusinessNotice Published: 08-07-26Response Due: 08-14-26Agency: Department of the ArmyOffice: W6QM MICC-FT DRUMContact: Carrie Lawton This email address is being protected from spambots. You need JavaScript enabled to view it. Ph: (772) 106-5Office Address: FORT DRUM, NY 13602-5220Place of Performance: 4525 Camp Hale Rd Fort Drum, NY 13602 13602
Click for official SAM (FBO) notice, additional information, and accompanying attachments
The brand name or equal to Bobcat Toolcat UW56 must feature a 61-horsepower turbo diesel engine and have an operating weight between 5,800 and 6,000 lbs. It requires a fully hydrostatic transmission with high and low range, achieving a top speed of 18 miles per hour, alongside full-time all-wheel drive with limited slip differentials and an all-wheel steer system. The fully enclosed cab must be ROPS and FOPS protected, equipped with heat and AC, an operators cab sound reduction package, front windshield wipers, an AM/FM radio with weather band, a backup camera, a horn, right and left outside mirrors, and a keyless start system. For operation and safety, the utility work machine must include 4-wheel independent suspension, size 27x10.5-15 8-ply deep lug tires, a backup alarm, a beacon, front and rear work lights, road lighting, and at least a 20-gallon fuel tank. The hydraulic and attachment system must feature auxiliary hydraulics, controls, and remotes with an 18 gallons per minute flow, high-flow hydraulics with a 27 gallons per minute flow, hydraulic attachment remotes with pressure relief, and a 7-pin electric control attachment kit. It must also be equipped with joystick controls for implements, a skid steer style attachment coupler, a hydraulic coupler system for attachment changing, a 62-inch dirt bucket with a steel bolt-on cutting edge and side cutters, a 72-inch front-mount 2-stage snowblower requiring high-flow hydraulics, a hydraulic dump box with a 2,000 lb lift capacity, and a 2-inch receiver trailer hitch. Finally, the procurement must include all parts, operators, and service manuals, a scannable unique identification label, onsite operators training, and delivery to Fort Drum, NY.