Toolcat
Subject: ToolcatSolicitation Number: W911S226U3980Notice Type: SOLICITNAICS: 339999Set-Aside: Total Small BusinessNotice Published: 08-10-26Response Due: 08-14-26Agency: Department of the ArmyOffice: W6QM MICC-FT DRUMContact: Carrie Lawton This email address is being protected from spambots. You need JavaScript enabled to view it. Ph: (772) 106-5Office Address: FORT DRUM, NY 13602-5220Place of Performance: 4525 Camp Hale Rd Fort Drum, NY 13602 13602Related Notices:
Click for official SAM (FBO) notice, additional information, and accompanying attachments
The brand name or equal to Bobcat Toolcat UW56 must feature a 61-horsepower turbo diesel engine and have an operating weight between 5,800 and 6,000 lbs. It requires a fully hydrostatic transmission with high and low range, achieving a top speed of 18 miles per hour, alongside full-time all-wheel drive with limited slip differentials and an all-wheel steer system. The fully enclosed cab must be ROPS and FOPS protected, equipped with heat and AC, an operators cab sound reduction package, front windshield wipers, an AM/FM radio with weather band, a backup camera, a horn, right and left outside mirrors, and a keyless start system. For operation and safety, the utility work machine must include 4-wheel independent suspension, size 27x10.5-15 8-ply deep lug tires, a backup alarm, a beacon, front and rear work lights, road lighting, and at least a 20-gallon fuel tank. The hydraulic and attachment system must feature auxiliary hydraulics, controls, and remotes with an 18 gallons per minute flow, high-flow hydraulics with a 27 gallons per minute flow, hydraulic attachment remotes with pressure relief, and a 7-pin electric control attachment kit. It must also be equipped with joystick controls for implements, a skid steer style attachment coupler, a hydraulic coupler system for attachment changing, a 62-inch dirt bucket with a steel bolt-on cutting edge and side cutters, a 72-inch front-mount 2-stage snowblower requiring high-flow hydraulics, a hydraulic dump box with a 2,000 lb lift capacity, and a 2-inch receiver trailer hitch. Finally, the procurement must include all parts, operators, and service manuals, a scannable unique identification label, onsite operators training, and delivery to Fort Drum, NY.