Inspect and Repair of 13.2KV Main Switchgear
Subject: Inspect and Repair of 13.2KV Main SwitchgearSolicitation Number: 70ZH1526QCGA00009Notice Type: SOLICITNAICS: 238210Set-Aside: Total Small BusinessNotice Published: 10-30-26Response Due: 11-12-26Agency: Department of Homeland SecurityOffice: US COAST GUARDContact: Jerome Manuel This email address is being protected from spambots. You need JavaScript enabled to view it.Office Address: New London, CT 06320Place of Performance: New London, CT 06320
Click for official SAM (FBO) notice, additional information, and accompanying attachments
The U.S. Coast Guard Academy requires a qualified, licensed electrical contractor to inspect, repair as necessary, test, and restore Eaton/Cutler-Hammer MVS2 13.2 kV medium-voltage load interrupter switchgear, with primary work focused on Cabinet 5 and the associated 15 kV feeder cable serving Smith Hall. The contractor shall inspect Cabinet 5 for damage or missing/cannibalized components; remove and replace three Eaton 15CLE-250E fuses; procure and deliver three additional matching fuses for on-site spares; perform insulation-resistance testing of the feeder cable in accordance with current ANSI/NETA standards; provide certified test and field-service reports; coordinate all required outages and lockout/tagout procedures with the Government; and safely re-energize the cabinet and feeder upon successful completion of repairs and testing. All work shall comply with applicable OSHA, NFPA 70E, federal, state, and local requirements, including proper licensed personnel, arc-flash personal protective equipment, site protection, cleanup, and disposal of waste materials.